Membrane manufacturer in China · Exporting worldwide

UF Membrane · Model HM1060 / HM250

HM1060 / HM250 Hollow Fiber UF Membrane

A 50 m² hollow fiber module with a published performance table, suitable for medium and large UF installations.

  • 50 m² nominal membrane area
  • > 6 log bacteria removal
  • Dead-end or cross-flow operation
  • Storage & handling guidance supplied

Datasheet, samples and OEM options available on request.

Product description

The HM1060 / HM250 module is a 50 m² active-area hollow fiber element designed for inside-out and outside-in operation. It delivers a design flux of 40–80 L/m²/h with product water SDI15 below 3 and turbidity below 1 NTU.

Bacteria removal exceeds 6 log and virus removal exceeds 4 log, making it an effective hygienic barrier for drinking water, RO pretreatment and reclaimed water polishing. The module can be run in dead-end or cross-flow mode and cleaned by backwash plus periodic chemical cleaning.

Important handling notes: never drain the preservation liquid before installation — hollow fibers lose performance if they dry out. Protect modules from freezing, avoid impact on the plastic housing, and keep connections free of oil and dirt.

Product details

HM1060 / HM250 — specification and detail images

Original manufacturer photographs, dimension drawings and specification tables for this model.

HM1060 / HM250 specification and detail image 1 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 2 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 3 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 4 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 5 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 6 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 7 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 8 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 9 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 10 — HM1060 / HM250 Hollow Fiber UF Membrane
HM1060 / HM250 specification and detail image 11 — HM1060 / HM250 Hollow Fiber UF Membrane

Product photographs supplied by HUAMO Membrane. View the original catalogue page.

Technical data

Specifications and operating limits

Values below are indicative. Request the official datasheet for certified performance data and design conditions.

Technical specifications
ParameterSpecification
ModelHM1060 / HM250
Design flux40–80 L/m²/h
Nominal membrane area50 m²
Product water SDI15< 3
Expected filtrate turbidity< 1 NTU
E. coli removal> 6 log
Virus removal> 4 log
Filtration modeDead-end or cross-flow
Membrane materialPVC / PAN / PVDF
Housing & sealingPVC, epoxy resin
Nominal MWCO100,000 Dalton
Fiber inner / outer diameter1.0 / 1.6 mm
Max. inlet pressure0.3 MPa
Max. transmembrane pressure< 0.2 MPa
Max. operating temperature40 °C
pH range3–9
Backwash flux100–200 L/m²/h
Dimensions A / B / L1 / L2 / L3250 / 173 / 1600 / 1680 / 1713 mm

Design flux depends on feed conditions. SDI15 and turbidity figures are measured with influent turbidity < 20 NTU. Chemical cleaning is recommended when permeate flow drops by more than 20% or after 1–4 months of operation.

Typical applications

  • Drinking water treatment
  • RO pre-treatment
  • Water reuse
  • Food & beverage clarification

View all UF Membrane products or application solutions.

Why source this from HUAMO

  • Factory-direct manufacturing and pricing
  • Individual performance testing before packing
  • Export packing and documentation
  • Engineering support for selection and troubleshooting

Get a quote

Request pricing, datasheet or samples

Tell us the model, quantity and your application. We reply within one business day.

Email ussales@huamembrane.com WhatsApp / Phone+86 13599078217
HeadquartersQuanzhou, Fujian, China
Business hoursMonday – Saturday, 8:30 – 18:00 (GMT+8)

Prefer email? Write to sales@huamembrane.com or chat on WhatsApp.

All fields are optional. We reply within one business day.

FAQ

Questions about HM1060 / HM250

How should UF modules be stored before installation?

Keep modules sealed in original packaging, indoors, away from direct sunlight or UV, at 10–30 °C and below 70% humidity, stored horizontally. Do not allow the fibers to dry out.

Chat on WhatsApp