Products / RO Membrane
Reverse Osmosis (RO) Membranes
Reverse osmosis is the workhorse of modern water treatment, removing dissolved salts, organics and dissolved solids down to the ionic level. HUAMO manufactures spiral-wound RO membrane elements in the standard 4-inch and 8-inch formats used across commercial and industrial systems worldwide.

Our portfolio covers three operating envelopes. The BW (brackish water) series is designed for well water, surface water and municipal feed with moderate salinity. The ULP (ultra-low pressure) series delivers the required permeate flow at significantly lower feed pressure, cutting energy consumption in low-TDS applications. The SW (seawater) series combines high salt rejection with the mechanical strength needed for high-pressure desalination.
All elements use thin-film composite polyamide membranes and industry-standard dimensions, so they can be specified for new builds or used as drop-in replacements in existing 4040 and 8040 pressure vessels. If you are unsure which series fits your feed water, send us your TDS, SDI, temperature and target permeate quality — our engineers will recommend a model and provide the operating window.
Series overview
Choose the series that fits your feed water
BW — Brackish Water
Standard choice for industrial process water and municipal treatment, balanced flux and rejection.
Learn moreULP — Ultra-Low Pressure
Lower operating pressure for low-salinity feed, reducing pump sizing and power draw.
Learn moreSW — Seawater Desalination
High rejection at seawater salinity, suitable for single-pass desalination designs.
Learn moreDomestic RO Elements
Compact elements for household and point-of-use purification systems.
Learn moreAvailable models
Models in this product line
Click a model for full technical parameters and a direct inquiry form.

RO Membrane
BW-8040 Brackish Water RO Membrane
An 8-inch thin-film composite element for brackish and industrial feed water, balancing permeate flow and salt rejecti…
View details
RO Membrane
BW-4040 Brackish Water RO Membrane
A 4-inch brackish water element for small commercial plants, laboratories and pilot systems that use 4040 pressure ves…
View details
RO Membrane
ULP-8040 Ultra-Low Pressure RO Membrane
An energy-saving 8-inch element that reaches target permeate flow at lower feed pressure on low-salinity feed water.
View details
RO Membrane
ULP-4040 Ultra-Low Pressure RO Membrane
The 4-inch version of our ultra-low pressure series, for compact systems running on low-salinity feed water.
View details
RO Membrane
SW-8040 Seawater Reverse Osmosis Membrane
A high-rejection 8-inch seawater element engineered for single-pass desalination, with published performance and opera…
View details
RO Membrane
SW-4040 Seawater Reverse Osmosis Membrane
Seawater-grade rejection in a 4-inch element for compact desalination plants, boats and offshore packages.
View details
RO Membrane
Domestic RO Membrane
Compact RO elements for household purifiers and point-of-use systems, available for OEM and distribution supply.
View detailsTypical applications
- Industrial process water
- Drinking water plants
- Boiler feed water
- Seawater & brackish desalination
- Food & beverage
- Pharmaceutical pre-treatment
Selection support
Not sure which model fits your feed water? Send us TDS, SDI, temperature, target permeate quality and flow rate. Our engineers will recommend an element and provide the datasheet and operating limits.
Ask an engineerFAQ
Common questions about RO Membrane
More answers are available in our full FAQ and technical resources.
What is the difference between 4040 and 8040 RO membranes?
The numbers refer to nominal diameter and length: a 4040 element is roughly 4 inches in diameter and 40 inches long, while an 8040 is 8 inches by 40 inches. 8040 elements offer about four times the active membrane area and are used in commercial and industrial plants; 4040 elements suit smaller systems and pilot units.
Can HUAMO membranes replace elements from other brands?
Yes. Our elements follow standard 4-inch and 8-inch dimensional conventions, including permeate tube diameter and overall length. Confirm the exact dimensions and interconnector style with our team before ordering a replacement.
How do I choose between BW, ULP and SW series?
Base the choice on feed TDS and available pressure. ULP suits low-TDS feed where energy savings matter, BW covers general brackish and industrial water, and SW is required for seawater salinity and high-pressure desalination.
Complete your system
Related product lines

UF Membrane
Hollow fiber ultrafiltration removes bacteria, colloids, suspended solids and high-molecular-weight organics while operating at lo…
Explore range
Nanofiltration Membrane
Nanofiltration sits between ultrafiltration and reverse osmosis. With a pore size around 1–2 nm, an NF membrane passes monovalent …
Explore range
MBR Membrane
Membrane bioreactors combine biological treatment with membrane separation, replacing the secondary clarifier and producing a high…
Explore range
Membrane Housing
The pressure vessel is the mechanical heart of an RO train. HUAMO supplies FRP (fiberglass reinforced plastic) membrane housings a…
Explore rangeNeed pricing or a datasheet for RO Membrane?
Send the model, quantity and destination. We will reply with a quotation and current technical documentation.