Membrane material preparation
Casting and quality control of the thin-film composite polyamide separation layer and support membrane.
Not sure which model?
Send your feed water analysis and our engineers will select the right element, array and pretreatment for your plant.
Ask an engineer Full merged catalogue View all productsManufacturing & quality
A 50,000 m² production base, around 900,000 membrane elements per year, and performance testing on every element before it leaves the factory.
Production
Spiral-wound element manufacturing is a controlled sequence. Each step is documented so a batch can be traced back to its materials and test record.
Casting and quality control of the thin-film composite polyamide separation layer and support membrane.
Automated winding of membrane leaves, feed spacers and permeate carriers around the central permeate tube.
Controlled curing, outer wrapping with fiberglass, end-cap fitting and brine seal installation.
Every element is checked for permeate flow, salt rejection and pressure integrity, with batch records retained.
Elements are sealed in protective packaging with preservation solution and labelled for traceability.
Quality control
Water treatment plants depend on predictable membrane performance. Our outgoing inspection focuses on the parameters that matter in operation.
| Parameter | Specification |
|---|---|
| Permeate flow | Measured under standard test conditions against the model specification |
| Salt rejection | Stabilized and minimum rejection verified per batch |
| Pressure integrity | Hydrostatic and differential-pressure checks on elements and vessels |
| Dimensional inspection | Length, diameter, permeate tube and seal fit against standard 4040 / 8040 tolerances |
| Visual & packaging check | Surface, end caps, O-rings, labelling and preservation liquid level |
Test conditions, tolerances and acceptance criteria are defined in the datasheet for each product series. Ask our team for the current revision before placing an order.
Capability
We support both catalogue orders and specification-driven production.
RO, UF, MBR and NF membranes, FRP and stainless steel housings, EDI modules, resins and complete RO systems from one supplier.
Around 900,000 membrane elements per year from a 50,000 m² facility, covering standard 4040 / 8040 formats and domestic elements.
Private-label packaging, custom FRP vessel lengths and colors, and system skids configured to project specifications.
Shipments to North America, Europe, Southeast Asia, South America and Africa, with standard export documentation.
Tell us the model and your application. We will send the current documentation and a quotation.