
UF Membrane · Model HM 2860 / 2880
Ultrafiltration Membrane HM 2860 / 2880
Pressurized hollow fiber UF modules widely used as RO pretreatment and in industrial clarification skids.
- Low energy consumption
- High filtration precision
- Large permeate output
- Strong anti-fouling performance
Datasheet, samples and OEM options available on request.
Product description
The HM 2860 / 2880 series uses advanced inside-out and outside-in hollow fiber separation technology. Operating at ambient temperature and low pressure, the modules combine low energy consumption, high filtration precision, high water output and strong resistance to fouling.
They effectively remove bacteria, colloids, suspended solids, rust and macromolecular organic matter, delivering clean, hygienic permeate. Modules are commonly installed ahead of RO trains to stabilize SDI, or used standalone for surface water and reuse duties.
Product details
HM 2860 / 2880 — specification and detail images
Original manufacturer photographs, dimension drawings and specification tables for this model.
Product photographs supplied by HUAMO Membrane. View the original catalogue page.
Technical data
Specifications and operating limits
Values below are indicative. Request the official datasheet for certified performance data and design conditions.
| Parameter | Specification |
|---|---|
| Membrane material | PVC / PAN / PVDF |
| Housing & sealing material | PVC, epoxy resin |
| Nominal MWCO | 100,000 Dalton |
| Fiber inner / outer diameter | 1.0 / 1.6 mm |
| Design flux | 40–80 L/m²/h (feed dependent) |
| Product water SDI15 | < 3 |
| Filtrate turbidity | < 1 NTU |
| E. coli removal | > 6 log |
| Virus removal | > 4 log |
| Max. inlet pressure | 0.3 MPa |
| Max. transmembrane pressure | < 0.2 MPa |
| Recommended operating TMP | 0.01–0.1 MPa |
| Max. operating temperature | 40 °C |
| pH range | 3–9 |
| Backwash pressure | < 0.2 MPa |
| Backwash flux | 100–200 L/m²/h |
| Filtration mode | Dead-end or cross-flow |
Typical applications
- RO pre-treatment
- Surface water clarification
- Industrial process water
- Water reuse
View all UF Membrane products or application solutions.
Why source this from HUAMO
- Factory-direct manufacturing and pricing
- Individual performance testing before packing
- Export packing and documentation
- Engineering support for selection and troubleshooting
Get a quote
Request pricing, datasheet or samples
Tell us the model, quantity and your application. We reply within one business day.
Prefer email? Write to sales@huamembrane.com or chat on WhatsApp.
FAQ
Questions about HM 2860 / 2880
Should I choose PVDF, PVC or PAN fibers?
PVDF offers stronger chemical and oxidation tolerance for aggressive cleaning regimes and difficult feed; PVC and PAN are cost-effective for general water duties. We can recommend based on your feed and cleaning chemicals.


